Biocide K 10 SG

Formulation based on partially chlorinated heterocyclic compounds.

BACTERICIDE/FUNGICIDE

suitable for storage protection of waterborne systems such as paints, glues, emulsions...

FIELD OF USE

Water-based products are very often subjected to microbiological degradations which are causing various drawbacks such as foul odours, viscosity decreases, products, composition modifications, molds apparition... All these problems are not only detrimental to the product's appearance, but also to its technical properties.

BIOCIDE K 10 SG is a powerful bactericide/fungicide, showing a wide activity spectrum which allows the end user to avoid these microbiological distrubances. It can be used in waterborne systems such as paints and related products, glues, emulsions, concrete additives... in a wide pH range (4 to 8.5).

BIOCIDE K 10 SG active ingredients are homologated for contact with foodstuffs according to the FDA and BGA regulations.

BIOCIDE K 10 SG has the advantage to be solvent free.

INDICATIVE DOSAGE LEVELS AND METHOD OF USE

BIOCIDE K 10 SG should be used at dosage levels ranging from 0.1 to 0.2% in function of the weight of product to be protected.

BIOCIDE K 10 SG can be added at any stage of the production process. However, owing to the very small dosage level, it is advisable if possible to incorporate it at the beginning of the manufacturing process, so that an homogeneous repartition into the product to be protected can be achieved.

Stability

BIOCIDE K 10 SG is stable during storage, when stored in cool and well-ventilated premises and when kept into closed packagings.

when product is stored into stainless steel tanks, the 316 L quality is strongly recommended.

In any case, Progiven laboratories remain at your full disposal to determine the optimal dosage rate to be kept and check its practical efficiency.